RAM Commander User Manual

Installation Reqiuirements

Installation Reqiuirements

Previous topic Next topic  

Installation Reqiuirements

Previous topic Next topic  

Hardware and Software Requirements for RAM Commander installation:

 

Client/Standalone:

OS: MS Windows XP / Vista / 7 / 8

Both 32-bit and 64-bit processors and OS supported.

Hardware: Desktop/Laptop PC with recommended hardware configuration for installed OS version.

Generally it is:

o3 GHz or higher Windows-compatible processor (Intel Pentium/Celeron family, i5/i7, or AMD K6/Athlon/Duron)
o4GB RAM
oFree 100MB Hard Drive space (for software installation only, required capacity depends on expected database sizes)
o1024x768 x 24bit colors video adapter and monitor
oKeyboard and Mouse

MS Word reports generation requires .NET Framework 2.0 installed.

Charts generation requires .NET Framework 4.0 Full installed.

Some modules require MS Office (MS Word and MS Excel) installed.

 

Server (if client/server configuration is used - not required for standalone):

OS: Windows XP/Vista/7/2003 Server/2008 Server/2012 Server

Both 32-bit and 64-bit processors and OS supported.

Hardware: Recommended hardware configuration for installed OS version.

Generally it is:

o3 GHz or higher Windows-compatible Dual-core processor (Intel Pentium/Celeron family, or AMD K6/Athlon/Duron, i5/i7)
o4GB RAM
oFree 1GB Hard Drive space (for software installation only, required capacity depends on expected database sizes)

Some modules require .NET Framework 2.0 installed.

 

Requirements listed above are minimal requirements for running the software. Optimal recommended requirements depend on the nature of projects and calculations planned to perform, size of product trees, complexity of fault trees, number of products being analysed etc. Better processors and larger RAM size will improve the calculation speed.

 


© ALD Reliability and Safety Software