FMECA Library

FMECA module contains comprehensive library allowing customization of the module and saving time during FMECA grid data entry. In the FMECA library you may enter and customize Phases, Severities, Criticality groups, test types and other information specific to your particular FMECA standard, language or product. See FMECA Libraries paragraph later in this chapter for more information.

FMECA analysis may be performed for several product life cycle/mission phases separately. You may define required phases and their durations in the FMECA Library. Then you may choose the current FMECA analysis phase and switch between phases:

1.	From the Project menu, choose Configuration.

2.	Check the FMEA radio button.

3.	Select the required phase from the drop down list next to the FMEA section.

4. Press Ok.