|
Local USB plug |
|
|
|
|
Local USB plug |
|
|
Local USB plug
|
Local USB plug |
|
|
|
|
Local USB plug |
|
|
Local USB plug should be inserted into the USB port of PC where RAM Commander is installed. It may be exchanged among users and computers, but grants access to its current holder only.
Before running RAM Commander, ensure that the local plug is connected to the USB port of your computer.
If not, then switch off your computer, connect the plug and switch on again. The plug driver is installed automatically during the RAM Commander installation. If plug problems appears after the installation, you can install plug driver manually.
To install a local plug driver manually:
| 1. | Run the program HASPUserSetup.exe from the RAM Commander installation CD \HASP\"Driver HL" folder with the latest version number in folder's name. You may also download the drivers setup package from our web site: https://www.aldsoftware.com/download/download/HASPUserSetup.exe |
| 2. | Choose the Yes button to install. |
| 3. | Follow the interactive instructions. The plug driver will be installed. |
| 4. | Now you may run RAM Commander. |