|
Import FT from Aralia Simtree |
|
|
|
|
Import FT from Aralia Simtree |
|
|
Import FT from Aralia Simtree
|
Import FT from Aralia Simtree |
|
|
|
|
Import FT from Aralia Simtree |
|
|
RAM Commander may import single fault trees from Aralia Simtree.
Import is performed from "DAG" file (SimTree compatibility file V2.1000) which should be prepared using Aralia software before importing in to RAM Commander.
To import Aralia Simtree fault tree into the RAM Commander:
| 1. | Open the desired project and database. |
| 2. | Open the list of fault trees, create new or open any FT. |
| 3. | Choose "Import from Aralia Simtree" option from the Tools menu. |
| 4. | Select the DAG file exported from the Aralia. |
| 5. | Fault tree will be imported and you will get message about import result. |