|
To create a new Failure Mode |
|
|
|
|
To create a new Failure Mode |
|
|
To create a new Failure Mode
|
To create a new Failure Mode |
|
|
|
|
To create a new Failure Mode |
|
|
There are three ways to create a new Failure Mode (FM) for the selected item:
| 1. | From the Item menu, choose Failure Modes and select Add Failure Mode. The Insert/Update Potential Failure Mode dialog box opens. |
- or -
| 2. | Right-click on the table, and select Add FM from the pop-up menu. The Insert/Update Potential Failure Mode dialog box opens. |
- or -
| 3. | Insert data directly into the table - double-click on the left-most cell in the blank line after the last table entry and enter Failure Mode data. |
The number of Failure Modes for every diagram element is unlimited.