|
To create a new Failure Cause |
|
|
|
|
To create a new Failure Cause |
|
|
To create a new Failure Cause
|
To create a new Failure Cause |
|
|
|
|
To create a new Failure Cause |
|
|
There are three ways to create a new Failure Cause for the selected Failure Mode:
| 1. | From the Item menu, choose Failure Modes and select the Add FM cause menu item. |
- or -
| 2. | Right-click on the table at required Failure Mode row and choose Add Cause from the pop-up menu. |
The Insert/Update Potential Cause of Failure dialog box opens:
Fill in the necessary fields and press Ok.
- or -
3. To insert data directly into the table, double-click on the “Cause” column of the blank row with only a Failure Mode entered in the table, and then enter Cause data as required.
The number of Causes modes for every Failure Mode is unlimited.