Project Configuration

Project-related information like default reliability prediction methods, Maintainability organizational levels or FMECA current phase are defined using Project Configuration dialog.

To change Project Configuration settings:

1.	Open a Product tree view.

2.	From the Project menu, choose Configuration.

3.	The Project configuration dialog box opens:

ProjectConfig

4.	See each specific module chapter for more information about module-specific settings.

For reliability prediction you should set required default reliability prediction methods for each family of components (except Assembly) - as shown on the screen above - see Configurating Reliability Module paragraph.

For FMECA you should select phase and criticality - see Configurating FMECA module and FMECA Grid Customization paragraphs.

For Maintainability you may select different calculation methods and customize levels of replace/repair - see Customize Organizational Levels and Set Mct max Calculation Method paragraphs.