Maintainability Reports

1.	Select Maintainability mode.

2.	Navigate to any level in the product tree.

3.	From the Reports menu, choose Standard Kit; the Report Selection dialog box opens.

4.	Select the report Type (see below) and the applicable Include items options. (Note how the fields in the Report Selection dialog box change accordingly.)

The table below explains the available report types:

Report Group	Description
Tree diagram	Tree structure
Maintainability information	ID, PN, RefDes, Qty, F.R.[FIT], Mct[hrs], MLH.
Level of replace information	ID, PN, RefDes, NHA, Qty, Mct[hrs].
Maintainability data	ID, PN, RefDes, Qty, maintenance tasks, F.R.[FIT], Mct[hrs], MLH.
MEA	(Maintenance Engineering Analysis): System, Next higher assembly, Part No., Part number, Freq*10^-6, Mnt.Lvl., Manual, Detect. Method, Maint. Method, Remark, Task No., Task Description, Task Code, Time[min], MP.
Configuration control	ID, reference designator, Qty, Mct, MLH
Maintenance tasks	Maint. Task, Task Description, Mp, Total Time, Task Source, Description, Qty, T[min].
Maintenance tasks analysis – Information	Item, Maint.Task, required skills, equipment and materials for each task
Maintenance tasks analysis – Skills summary	Calculation of Total Labour Hours per year for each skill type, according to system usage scenario.
Maintenance tasks analysis – STE summary	Calculation of Total Labour Hours per year for each equipment type, according to system usage scenario.
Maintenance tasks analysis – Materials summary	Calculation of material consumption for maintenance tasks per year for each material, according to system usage scenario.

5.	To limit the report to a certain number of levels from the starting level, enter that number in the Depth from start item field.

6.	Under ‘Report items replaced in’ select Organizational, Intermediate and/or Depot. (eg. If Depot is selected, then only those items whose level of replace is defined as ‘Depot’ will be included in the report table.)

7.	Select ‘Go under Hybrid’ so that the sub-items of any hybrid in the tree will be displayed in the report.

8.	Choose OK.

RAM Commander generates and displays the report in a report window.

You can print the report by selecting Print from the Report menu or click on the printer icon. The Windows print dialog box opens. Make the selections appropriate for your printer and choose OK.

To close a report window, double-click on its control button.

Use the report management techniques described in Chapter "Fundamentals" paragraph "Reports" to view and print the report.